The main objective was to document the differences between drinking times and oral perception between liquids in individuals with dysphagia. A second objective was to assess variations in consistency categorization across instruments. A third objective was to explore the relationship between drinking time and dysphagia severity. A sample of individuals with OPMD (n = 30; 40-75 years) was recruited. Participants drank 80 mL of water, followed by three blinded commercially pre-thickened cranberry cocktails (CranA, CranB, CranC). Flow rates were measured with Bostwick consistometer, IDDSI Flow Test, and Discovery HR 20 rheometer. Patient-reported outcome measures were used to assess dysphagia. Mean drinking times for participants with OPMD were as follows: 7.9 ± 4.4 s for water, 10.7 ± 4.8 s for CranA, 12.3 ± 5.7 s for CranB, and 15.2 ± 7.2 s for CranC. All four times were statistically different from each other. Participants reported noticeable differences in oral perception. The Bostwick flow rates were different for all three cocktails. Based on IDDSI Flow Test, CranA was categorized as IDDSI level-2, while both CranB and CranC were categorized as IDDSI level-3. Correlations ranging from 0.39 to 0.55 were found between drinking times and dysphagia severity. In conclusion, liquids within the same IDDSI category can have different Bostwick flow rates and oral perception. The hypothesis that participants with OPMD may find certain liquids more challenging to swallow, despite being in the same IDDSI category, deserves further exploration in future studies.

This is a review of mucus, and its principal component, mucins, in oral processing; it examines oral processing from the viewpoint of mucins being integral functional constituents of the food after the latter's insertion into the mouth. Under this light, mucins are treated as an omni-present functional ingredient. The chemical physics of the bolus formation is examined, focused on the role of mucins in the process. The colloidal and rheological aspects of hydrocolloids-mucin systems are subsequently examined, highlighting the role of the oral glycoproteins in complex food models and complex foods. Following the physicochemical and mechanical description of the topic, mucus is examined as a determinant of a food's sensory attributes. Its role in oral sensations such as astringency is reviewed, with a special focus on phenol-mucin interactions. The effect of mucus on the perception of saltiness is then reviewed, and the ensuing strategies for structurally-based reduction of salt are considered. The review critically discusses the challenges and opportunities that emerge from the above, highlighting the role of mucins and their effect on food function.

Suspoemulsions are used for food, cosmetic and pharmaceutical products, including food such as dairy products and non-dairy alternatives. Product properties, such as flow behavior or sensory perception of non-dairy products differ from those of dairy products and are therefore perceived by consumers as products of inferior quality. One reason for this may be the crystallization behavior of the added triglycerides leading to differences in solid fat content in comparison to cow milk. This is discussed with the solidity of the dispersed phase as a parameter of suspoemulsions. The solidity was varied by using low and high melting triglycerides and measuring at different temperatures. The dispersed phase fraction is φ = 30%. The droplet size distribution showed a x of 1.2 and 3.66 μm, mimicking the droplet sizes of milk and dairy cream. Rheological frequency sweeps were carried out within a temperature range from 5°C to 50°C. The differences in solidity of the dispersed phase caused no changes in viscosity at each temperature. In contrast, oral tribology distinguished different solidities of the dispersed phase with changes in the friction coefficient. The friction coefficient was determined for increasing rotational speeds (0.01-100 mm/s), to compare the so called Stribeck curves with each other. In general, with increasing solidity of the dispersed phase, the friction coefficient increases. Comparing the Stribeck curves of pure butter fat suspoemulsion with those of plant-based fat suspoemulsions, different plant-based fats can be mixed, to mimic the friction profile of milk products in plant-based alternatives.

In this work, toothpaste tube squeezability was tested by three different methods: assessment by a human panel, a tactile glove, and several purely instrumental tests. The panelists characterized squeezability in terms of the acceptability of the product. The tactile glove was utilized to determine the maximum grip forces (G) applied by the same panelists during their assessment. The instrumental tests consisted of emulative tests by a squeezing device and rheological tests. Along with commercial pastes, a series of samples were deliberately formulated and tested, and covered a wide range of squeezability rates of 0.07-2.31 cc/s. The study showed that it is possible to predict human sensory perception using either an emulative squeezing instrument or the rheological measurements of the pastes. The study also suggests that human perception of acceptable squeezability includes not only its low limit (pastes being hard to squeeze) but also its upper limit (pastes perceived as too runny) which may also be related to the inability of the paste to retain its shape on the brush. Based on this study consumer-acceptable ranges of rheological and squeezability parameters were defined. These results are expected to be useful, especially for oral/personal care product developers.

Hardness is a commonly reported food property, measured by compression at a high strain where the food structure breaks. Hardness should not be reported for foods that deform without breaking. Firmness is an intermediate level of hardness associated with nondestructive compression, at strains typically around 0.1. Sensory perception enables accurate classifications of hardness. Conversely (and perhaps counterintuitively), instrumental measurements of hardness while often precise are not necessarily accurate. The outcome depending on the test protocol, whereby the geometry of the test apparatus, the speed of the test and the degree of deformation all influence the result. Ambiguity occurs in how instrumental measurements of hardness are reported, with some authors using stress, while others use force.

This research explored the development of composite systems using konjac gum (KGM) and soy lecithin at concentrations of 1% KGM-0.01% lecithin and 1% KGM-0.2% lecithin. The study investigated the influence of both oral and artificial saliva on the rheological and tribological properties of these systems, as well as the lubrication on different friction surfaces with varying characteristics. It has been found that different friction surfaces exhibited distinct morphological features and roughness values, significantly impacting surface wettability when treated with saliva. The viscosity of KGM-lecithin composite systems increased slightly compared to KGM hydrogel. However, adding oral or artificial saliva led to a noticeable decrease in viscosity. Lecithin did not significantly alter the viscoelastic properties of KGM gel, but the incorporation of artificial and oral saliva introduced some changes. CLSM images showed that the stability and distribution of lecithin within the composite system varied with lecithin concentration and saliva type, with artificial saliva ensuring a stable and even distribution, while oral saliva caused aggregation and irregular distribution. Furthermore, the study found that the lubrication performance of the KGM-lecithin system was influenced by the properties of the friction surface, with hydrophilic rough surfaces providing superior lubrication compared to rough surfaces. The addition of lecithin enhanced lubrication across all tested surfaces, and artificial saliva surpassed oral saliva in reducing friction coefficients. These findings offer valuable insights into the potential use of KGM-lecithin composite systems as fat mimetics, particularly in enhancing lubrication for various applications.

The development of egg substitutes to partially or completely replace eggs is a noteworthy food trend in academia and industry. Previous studies have systematically investigated the potential of sodium caseinate (Na-Cas)/tannic acid (TA)/octenyl succinate starch (OSA-Starch) composites as foaming agents. The objective of this study was to extend the previous study and explore the potential application of Na-Cas/TA/OSA-Starch composites as egg replacers. Cakes and ice creams were produced by replacing 25%, 50%, and 75% of egg white with Na-Cas/TA/OSA-Starch composites. Some physical, rheological, and textural properties of cake and ice cream were determined to evaluate the feasibility of replacing egg white with Na-Cas/TA/OSA-Starch. Compared to the control, 25% Na-Cas/TA/OSA-Starch composites replacement of egg whites resulted in an increase in specific volume of the prepared cakes, an increase in hardness, a decrease in elasticity, and an increase in chewiness. As the amount of Na-Cas/TA/OSA-Starch composites substituted for eggs increased, the melt resistance of the ice cream decreased, the hardness increased, and the viscosity decreased, while the hardness and chewiness of the cake tended to increase. In conclusion, Na-Cas/TA/OSA-Starch composites have great potential as a new food ingredient for functional dairy ingredients in ice cream and cakes.

The objective of this study was to study the impact of pressing time on the microstructure of goat cheese and its relationship with sensory attributes. The microstructure of the artisanal cheeses was performed by scanning electron microscopy and image analysis. The validation of the microstructural complexity was carried out experimentally with sensory attributes. The pressing time influenced the microstructural parameters Feret, Geo, and τ and the cheese type influenced the parameters Feret, Geo, and Geo. The correlation values between microstructural complexity and sensory attributes were 0.85 and 0.84 for fresh cheeses and matured cheeses, respectively. The pressure times of 12 and 18 h resulted in cheese microstructures with the highest complexity in terms of Feret, Geo, Geo, and τ parameters. The obtained results are supported by the correlation values between microstructural complexity and sensory attributes.

The post-pandemic context has changed the modes for collecting data in sensory and consumer science. The objectives of this research were to analyze consumers' associations of food consistency and to study two virtual modes of the Free Word Association test (FWA). This test was administered to 209 consumers (180 women, 29 men, 18-45 years old) asynchronously (i.e. self-administered) and synchronously (i.e. face to face interviews). The Cognitive Salience Index (CSI) was calculated, and the structure of the social representation was analyzed. Correspondence analysis showed that food consistency was a mixture of concepts related to structure, hardness and several aspects of auditory (e.g., Crunchy, Crispy), tactile (e.g. Smooth, Spreadable) and oral texture (e.g., Creamy, Gummy). Slightly consistent food was associated with something soft, liquid or semisolid, and very consistent food to something hard and resistant. Consistent food was more related to "very" than to "slightly consistent." The CSI depended on the stimulus presented (p < 0.05). Regarding the social representation structure, the central core had the highest CSI for all stimuli (CSI ≥ 0.13, p < 0.05). Consumers defined "very consistent, consistent and slightly consistent food" by naming more foods in the synchronous mode than in the asynchronous one. In the asynchronous mode, consumers took more time to complete the test. The virtual FWA test (asynchronous or synchronous) showed some differences in the associations of term consistency, due to the lack of spontaneity in the first minute. It is important to adjust the methodologies to standardize the times in both modes.

This study investigates the forces exerted on organs during swallowing, specifically focusing on identifying forces other than those resulting from direct organ contact. Using a swallowing simulator based on the moving particle method, we simulated the swallowing process of healthy individuals upon the ingestion of thickened foods, which were simulated as shear-thinning flow without yield stress. We extracted the resultant force vectors acting on the organs and shape of the bolus at each time interval. The simulation results confirmed that the bolus originates from tongue movement and is transferred between the oral cavity and pharynx, with each organ's coordinated movements with the tongue occurring at their respective positions, as indicated by the balance of the resultant force vectors. Utilizing the information about the resultant force vectors obtained through simulations, we calculated the physical parameters of impulse, energy, and power. The variations in these physical parameters were aligned with the behaviors of both the biological system and the food bolus during swallowing. The force values calculated from the simulations closely approximate the theoretical values. Furthermore, the forces calculated from the simulations were relatively smaller than the force values derived from pressure information, such as that from high-resolution manometry and tongue pressure sensors. This difference can be attributed to the simulations extracting only the forces exerted on the organ by the food bolus. Force information on organs has the potential to provide a new interpretation of conventional mechanical indicators such as manometry and tongue pressure sensors.

Food texture is one of the most important factors for assessing the quality and acceptability of food. However, the study of food texture has been delayed compared with other factors, such as flavor and taste, due to the difficulty of quantitative analysis related to real physiological senses. Furthermore, the numerical and systematic evaluation of the texture property of dispersion systems, in which solid particles are dispersed in a liquid medium, is very difficult, despite most foods being in a solid-liquid dispersion state during mastication in the human mouth. In this study, the texture property of a solid-liquid dispersion system with spherical and cubic gel particles of agar and konjac was examined to evaluate the physical behavior of food during mastication using the back extrusion method. The yield stress of the system strongly depended on the size and shape of the particles, the mixing ratio of particles of different sizes and shapes, and the concentration of components in the particles. The proposed index, reflecting the size, shape, and number of particles and the yield stress of a single particle, expressed well the measured yield stress of the entire dispersion system. However, the adhesiveness and recoverability showed relatively little dependence on particle size. The findings obtained in this study will contribute to elucidating the texture property of various foods and to the development of new and novel food products and cuisines, thereby benefiting food science and industry.

A masticatory simulator is a mechanical device that mimics the physiological structures of the human oral cavity, chewing movement system, and functions. The advantage of this device lies in real-time tracking and analysis of food boluses within a sealed oral space, offering a direct validation platform for food experiments without constraints related to time, space, and individual variations. The degree to which the masticatory simulator simulates physiological structures reflects its efficacy in replicating oral physiological processes. This review mainly discusses the physiological structures of the oral cavity, the simulation of biomimetic components, and the development, feasibility assessment, applications, and prospects of masticatory simulators in food. The highlight of this review is the analogy of biomimetic component designs in masticatory simulators over the past 15 years. It summarizes the limitations of masticatory simulators and their biomimetic components, proposing potential directions for future development. The purpose of this review is to assist readers in understanding the research progress and latest literature findings on masticatory simulators while also offering insights into the design and innovation of masticatory simulators.

Fruit texture is a priority trait that guarantees the long-term economic sustainability of the cranberry industry through value-added products such as sweetened dried cranberries (SDCs). To develop a standard methodology to measure texture, we conducted a comparative analysis of 22 textural traits using five different methods under both harvest and postharvest conditions in 10 representative cranberry cultivars. A set of textural traits from the 10%-strain compression and puncture methods were identified that differentiate between cultivars primarily based on hardness/stiffness and elasticity properties. The complementary use of both methodologies allowed for a detailed evaluation by capturing the effect of key texture-determining factors such as structure, flesh, and skin. Furthermore, the high effectiveness of this approach in different conditions and its ability to capture high phenotypic variation in cultivars highlights its great potential for applicability in various areas of the value chain and research. Therefore, this study provides an informed reference for unifying future efforts to enhance cranberry fruit texture and quality.

Texture and sensory studies at various temperatures are important in evaluating and improving the functionality of butter. While literature is scarce, we evaluated and compared the effect of temperature (5-25°C) on the texture, rheological and sensory properties of commercial butter samples (salted, unsalted, cultured, and spreadable) from the New Zealand market. In addition, the instrumental analyses were compared with the sensory evaluation, to understand the possibility of using instrumental analysis to evaluate consumer liking for different butters. Butter type, temperature, and their type-temperature interaction exhibited significant differences for all instrumental textural parameters. As expected, higher temperature produced softer butter that was more spreadable, liquid-like, less adhesive, less cohesive, had lower storage modulus (G') and lower loss modulus (G″) with the melting of milk fat crystals; however, the rate of change varied for the different butter samples. We have established meltability as the parameter for evaluating butter selection for different applications. The spreadable butter sample exhibited the lowest hardness and G', and highest spreadability (p < .05) at all temperatures, owing to its low solid fat content and the abundance of low-melting triglycerides. The cultured butter sample had the highest melting point, owing to compositional differences. The instrumental and sensory texture analyses were highly correlated, indicating the comparative effectiveness of both approaches for studying the effects of different temperatures on butter textural properties. Overall, our findings provide detailed reference to the dairy industry for butter manufacture, considering variation in fatty acid composition, texture analysis, rheology, and sensory analysis, over the range of storage/usage temperatures.

Sous vide meat is an emerging food category, the consumption of which has increased owing to greater convenience, sensory traits, elderly consumers acceptance, and low-cost cuts use. However, required prolonged thermal treatment to achieve desired tenderness, impact energy-consumption besides triggering lipid oxidation, undesired off-flavors, and cooked meat profiles. Using a response surface methodology (RSM), this study evaluated the effects of the vegetal proteolytic papain (0 to 20 mg/kg) and low-temperature sous vide cooking (SVC) time (1 to 8 h at 65°C) in low-value marinated M. semitendinosus beefsteaks on technological characteristics associated with tenderness, and lipid oxidation. Additionally, the sensory profile traits of the pre-selected treatments were described using check-all-that-apply (CATA) and preference mapping. Shear force (WBsSF) was reduced with greater papain addition, whereas higher cooking losses (CL) were observed with longer SVC cooking times. Both the released total collagen and TBARS values increased with increasing papain concentrations and SVC times. Combining high levels of papain (>10 mg/kg) and SVC time (>6 h) resulted in lower WBsSF values (<20 N) but higher CL (>27%) and the CATA descriptors "aftertaste" and "mushy." The optimized conditions (14 mg/kg papain; 2 h SVC) also reduced WBsSF values (<26 N) with lower CL (<20%) and were most preferred and described as "juicy" and "tender" by consumers. Observed results suggest that combined mild SVC and papain may potentiate tenderness, conjointly favor juiciness and oxidation, further representing a promising tool for reducing SVC time without compromising valued sous vide sensory traits.

The tribological properties of 19 commercial food products, grouped into six categories (yogurt, dressings, spreads, porridges, emulsified sauces, and syrups) were investigated in relation to their rheological (dynamic oscillatory shear test) and nutritional properties (fat, carbohydrate, and protein). A tribological system (a glass ball and three polydimethylsiloxane pins) generated the extended Stribeck curve, monitoring friction factors (f) over an extended range of sliding speed (v) (10 to 10 m/s). Tribological parameters (f, v) at four inflection points dividing the frictional regimes (X, breakaway point between the static and kinetic regimes; X-X, boundary; X-X, mixed; X-X, hydrodynamic regimes) and the slope between X and X (s) were subjected to principal component analysis and hierarchical clustering on principal components, using rheological and nutritional parameters as quantitative supplementary variables. Tribological patterns were predominantly influenced by viscosity, viscoelasticity, yield stress, fat content, and the presence of particles (e.g., sugar, proteins, and fibers) and pasting materials (e.g., starches and modified starches). The 19 tribological patterns were classified into 3 clusters: low f and s for fat- and/or viscoelastic-dominant foods (Cluster 1), low f and high s for food emulsions and/or those with low extent of shear-thinning (Cluster 2), and high f at the boundary regime either for the most viscous foods or for those in the presence of particulates (Cluster 3). These results suggest that the compositional and rheological properties have a more profound impact on the classification of complex tribological patterns than the categories of food products.

The aim of this study was to investigate the modification of mechanical, rheological, and sensory properties of chickpea pastes and gels by incorporating other ingredients (olive oil or quinoa flour), to develop plant-based alternatives that meet consumer demands for healthy, natural, and enjoyable food products. The pastes and gels were made with different amounts of chickpea flour (9% and 12%, respectively). For each product, a first set of products with different oil content and a second set with quinoa flour (either added or replaced) were produced. The viscoelastic properties of the pastes and the mechanical properties of the gels were measured. Sensory evaluation and preference assessment were carried out with 100 participants using ranking tests. The study found remarkable differences in rheological, mechanical, and sensory properties of chickpea products upon the inclusion of oil and quinoa flour. The addition of oil increased the viscosity and decreased the elastic contribution to the viscoelasticity of the pastes, while it improved the firmness and plasticity in gels. It also increased the creaminess and preference of both pastes and gels. Replacing chickpea with quinoa flour resulted in less viscous pastes and gels with less firmness and more plasticity. In terms of sensory properties, the use of quinoa as a replacement ingredient resulted in less lumpiness in the chickpea paste and less consistency and more creaminess in both the pastes and gels, which had a positive effect on preference. The addition of quinoa increased the viscosity of pastes and the firmness and stiffness of gels. It increased the consistency and creaminess of both pastes and gels. Quinoa flour and/or olive oil are suitable ingredients in the formulation of chickpea-based products. They contribute to the structure of the system, providing different textural properties that improve acceptance.

This study offers a comprehensive review of current developments regarding the utilization of diverse hydrocolloids in formulating fruit fillings across different fruit types, their impact on textural attributes, rheological properties, thermal stability, syneresis, and nutritional advantages of fillings and optimization of its characteristics to align with consumer preferences. The review also focuses on the various factors influencing fruit fillings, including the selection of fruits, processing methodologies, the inherent nature and concentration of hydrocolloids, and their synergistic interactions. In depth, scientific work on the impact of the parameters such as pH, total soluble solids, and sugar content within the fruit fillings was also discussed. Additionally, this article focuses on the utilization of the diverse fruit fillings developed by using hydrocolloids in bakery products including pastry, tartlet, muffins, cookies, and so forth. The review establishes that hydrocolloids offer a spectrum of techno-functional attributes conducive to strengthening both the structural and thermal stability of fruit fillings, consequently extending their shelf life. It further establishes that incorporating of hydrocolloids facilitates the development of healthier food products by mitigating the necessity of excessive sugar or various other less favorable ingredients. The incorporation of fruit fillings in bakery products significantly increases the value proposition of these baked goods, contributing to their overall enhancement of quality and sensory value.

The incidence and prevalence of dysphagia worldwide are increasing yearly requiring a change in food texture to avoid malnutrition, dehydration, or sever complications. Riceberry porridges fortified with protein hydrolysate (1.5%), bio-calcium (589 mg), and thickened with xanthan gum (XG) of varying concentrations (0%, 0.255, 0.50%, 0.75%, 1.0%, and 2.0%) showed suitability for use in enriching diets of these patients. Porridges were examined using specified tests from the International Dysphagia Diet Standardization Initiative (IDDSI) and National Dysphagia Diet (NDD), and coupled with rheological, textural analyses, in vitro swallowing simulator and sensory analysis performed by a trained panel. Porridges with 0%-0.25% and 0.50%-2.0% XG were classified as IDDSI level 3 and 4, respectively, and apparent viscosities of porridges showed samples with XG displayed shear thinning behavior beneficial for patients with dysphagia. Increasing XG concentrations increased the consistency coefficient and decreased the flow behavior index (p < .05) with positive correlation of XG concentration with textural properties including firmness, consistency, cohesiveness, adhesiveness, and stickiness values. The relationship between instrumental measurements, in vitro and in vivo swallowing behavior showed high correlations with regards to XG concentration (r = .995). The findings indicate Riceberry porridges containing XG have significantly improved textural properties over those without XG for patients with dysphagia.

In this study, nine commercial ice creams and four prototypes were assessed. For the sensory analysis, quantitative descriptive analysis (QDA), and temporal dominance of sensations (TDS) methodology were used. According to the QDA results, full-composition ice cream showed significantly higher differences (p < .05) in terms such as vanilla and sweet flavors, brightness, creamy texture and appearance, and viscosity, exhibiting longer melting times. Functional ice creams showed significantly higher differences (p < .05) in terms like viscosity, creamy texture, and appearance. On the other hand, agave fructans in prototype ice creams were found to be able to reduce fat, but not fat and sugar simultaneously, showing a significant decrease (p < .05) in terms such as hardness, crystallized texture, gummy texture, and porosity. Based on the PCA results, the analysis accounted for 75.28% of data variability. Full-composition ice creams and one functional ice cream were related to terms such as viscosity, fatty sensation, creamy texture and appearance, dense, gummy, among others. The rest of the commercial ice creams were related to vanilla and caramel flavor and smell, artificial aftertaste, aerated, porosity, among others. Prototype ice creams were related to hard texture, salty and milk flavor, and crystallized texture. Based on the results of the TDS method, all formulations were found to be significantly dominant (5%) in terms such as vanilla flavor and sweet flavor at the beginning of the test. Formulations containing butyric fat and/or vegetable fat, or agave fructans were significantly dominant (5%) in fatty sensation.

With growing consumer demand for plant-based products that mimic the eating experience of animal-based products, there is a need for improvement in instrumental measurements of sensory texture. This study aimed to characterize textural differences between dairy and non-dairy cheeses, and to investigate whether Large Amplitude Oscillatory Shear (LAOS) rheometry could discriminate sensory texture better than Texture profile analysis. Commercial dairy and non-dairy cheddar, mozzarella, and cream cheese were selected to provide a wide range of textures. Sensory evaluation used the check-all-that-apply methodology with 73 consumers. Texture profile analysis force-distance data were analyzed empirically, and also converted to stress and strain (see https://shiny.csiro.au/texture_dash). The major textural differences between dairy and non-dairy cheddar were related to structural cohesion, according to both instrumental measures (dairy cheddar had 1.5-fold higher failure stress and 2.2-fold higher failure strain) and sensory measurements (dairy cheddar was more chewy and less crumbly). In contrast, cream cheeses showed similar textural properties using sensory testing but significant instrumental differences (non-dairy cream cheese had 5.7-fold higher modulus of deformability, 4.7-fold higher failure stress). For mozzarella, there were large differences in both sensory attributes (chewy, crumbly, jelly-like, stretchy) and instrumental parameters (13.6-fold difference in modulus, 2.7-fold difference in failure stress). LAOS rheometry gave insights into the mechanisms by which samples absorbed or dissipated mechanical energy at nonlinear strains. The LAOS parameter correlated well with sensory attributes creamy, fatty/oily, and moist, indicating the potential of this technique to measure structural phenomena linked to sensory attributes that resonate with consumers.