The transverse dimensions of internasal and nasopremaxillary sutures in rats were assessed at different ages and following different dietary functional demands.Eighty-four male Wistar rats were divided into two groups fed either a hard or a soft diet from 4 weeks of age, and sacrificed at 4 weeks (baseline: n = 12),16 weeks (n = 24), 26 weeks (n = 24), or 38 weeks (n = 24) of age. High-resolution micro-computed tomograms of the internasal and left nasopremaxillary sutures were obtained with 10 µm voxel size and 5 × 5 mm field of view. The endocranial and ectocranial suture widths, the mean suture width, and the suture height were measured. Linear regression analysis was used to estimate the effects of age and type of diet on suture dimensions. Internasal and nasopremaxillary suture dimensions were influenced by age, with a generally lower width and a larger height in the older animal. Regarding diet consistency, internasal suture widths were on average larger in the hard-diet group (e.g., mean suture width 43 µm in the hard- versus 30 µm in the soft-diet group at 26 weeks). In conclusion, the internasal and nasopremaxillary sutures tend to become narrower with age, while being influenced by masticatory functional demands.

Gender differences in pain reporting and prevalence have been demonstrated. As gender of examiner also affects reporting of pain on palpation, the aim of this study was to evaluate the effects of examiner gender on palpation performance using three different palpation methods. Examiners of both genders were instructed on the correct technique for each palpation method by either a female or male instructor. The target was to achieve a pressure of 100 kPa, corresponding to the 1 kg of force for muscle palpation described in the diagnostic criteria for temporomandibular disorders (DC/TMD). All examiners performed traditional palpation with the index finger, palpation with a palpometer, and a novel bimanual palpation with visual feedback, in a randomized order. The examiner's gender, and its interaction with the gender of the instructor did not significantly affect magnitude, accuracy, or precision of the pressure applied. The method of palpation was the only factor that significantly impacted all metrics. The palpometer achieved the lowest palpation magnitude (mean pressure applied = 113.7  kPa, 95% CI: 109.8-117.6), the highest accuracy (absolute difference = 15.7  kPa, 95% CI: 12.3-19.1), and the highest precision (mean coefficient of variation = 6.8, 95% CI: 6.0-7.6), followed by bimanual palpation and traditional palpation. The results suggest that gender differences in pain reporting in patients are not likely to be a result of the technical aspects associated with the gender of the examiner. Instead, these differences may be attributed to other factors, such as sociocultural influences.

A promising approach for managing root caries is the use of cross-linking agents to stabilize collagen. However, despite testing various natural and synthetic agents in vitro, their efficacy remains uncertain. The aim of this review was to examine which cross-linking agent performs better in reducing root caries lesion depth and the release of hydroxyproline, which is a marker of collagen degradation. Studies evaluating the impact of cross-linking agents on dentin were included, while studies performed on enamel surface/cell cultures and studies evaluating collagenase inhibitors were excluded, among others. A comprehensive search covered eight databases, and study quality was assessed using the QUINN Tool for in vitro dental studies. Synthesis of the results was done using a Bayesian network meta-analysis to compare agents. Fifty studies involving 31 cross-linking agents were included for qualitative synthesis. The network meta-analysis for lesion depth involved 284 samples across 36 comparisons and ranked cross-linking agents in terms of their caries lesion depth-reducing effect (from best to worst): naringin > quercetin > riboflavin > proanthocyanidins > hesperidin > glutaraldehyde > cranberry > grape seed extract > untreated controls. Only naringin, quercetin, proanthocyanidins, and glutaraldehyde showed statistically significant efficacy over untreated controls. Cranberry extract excelled in reducing hydroxyproline release, followed by proanthocyanidins. In conclusion, proanthocyanidins positively affected both outcomes, suggesting they are prime candidates for translational research. Clinical studies are now essential to evaluate their real-world effectiveness against root caries. PROSPERO-CRD42023404911.

This study evaluated the effects of two chlorophyll derivatives, sodium copper chlorophyllin (Cu-Chl) and sodium iron chlorophyllin (Fe-Chl), on the bond strength between a self-curing luting agent (4-META/MMA-TBB resin) and dentin. Five aqueous primers containing 35% 2-hydroxyethylmethacrylate with 0.007% Cu-Chl, 0.07% Cu-Chl, 0.007% Fe-Chl, 0.07% Fe-Chl, or neither Cu-Chl nor Fe-Chl (no-Chl) were prepared. The extracted human dentin surfaces were etched with 10% phosphoric acid (10PA), primed, and bonded to a resin block using the 4-META/MMA-TBB resin. A conventional etching agent (10-3) and 10PA without primer (PA/no-primer) were used as controls. The microtensile bond strength was determined after 48 h. The arithmetic medians for 20 stick specimens were calculated and statistically analyzed using a nonparametric Steel-Dwass test (α = 0.05). The maximum bond strength was achieved in the 0.007% Cu-Chl group, followed by those in the 0.07% Cu-Chl, 0.07% Fe-Chl, 10-3, 0.007% Fe-Chl, no-Chl, and PA/no-primer groups. No significant difference was observed between 0.007% Fe-Chl, 0.07% Fe-Chl, and 10-3. The bond strength to dentin etched with 10PA was influenced by the type and concentration of the chlorophyll derivatives applied. Cu-Chl rather than Fe-Chl should be useful as a component of surface treatment agents for bonding 4-META/MMA-TBB resin to dentin.

Water treeing and water droplets are observed within adhesive layers and on the hybridized surface after bonding sound dentin using single-bottle etch-and-rinse adhesives, indicating permeability of the hybrid layer to water. The aim of this study was to assess the efficacy of dentin sealing by adhesives containing propolis by quantifying the area of water transudation from dentinal tubules after dentin hybridization. Brazilian red propolis was added to experimental adhesive and Single Bond (3M/ESPE) adhesive; experimental adhesive and Single Bond without propolis were used as controls. Under simulated pulp pressure, two layers of adhesive were applied to etched human dentin discs. Three minutes after light-curing, the hybridized dentin surface was replicated, and epoxy resin replicas were created to obtain scanning electron microscope images. Data were evaluated using ANOVA and Tukey's test. Single Bond containing propolis significantly decreased water permeation through the hybrid layer compared with the control group. Three minutes after polymerization, the experimental adhesive without propolis had formed a permeable hybrid layer. The addition of Brazilian red propolis significantly reduced surface water on hybridized dentin in a concentration-dependent manner. Two-step etch-and-rinse adhesives containing propolis were effective in reducing water permeation through the hybridized dentin surface.

The aim of this study was to assess whether the involvement of major salivary and lacrimal glands in primary Sjögren's syndrome (pSS) affected the psychological resilience of patients. This cross-sectional study included 116 patients with pSS. Data were collected through clinical examinations, measurement of salivary flow rates (SFRs), and from Schirmer's test, as well as from patient-reported outcome measures (PROMs), such as the European League Against Rheumatism (EULAR) Sjögren's Syndrome Patient Reported Index (ESSPRI), Brief Resilience Scale (BRS), Work Productivity and Activity Impairment (WPAI), Oral Health Impact Profile-14 (OHIP-14), and the Hospital Anxiety and Depression Scale (HADS). Hyposalivation was defined as an unstimulated SFR of ≤0.1 mL/min. The BRS score (mean ± SD = 2.60 ± 0.69) was lower in patients with recurrent parotitis (2.11 ± 0.37) than in those without recurrent parotitis (2.67 ± 0.86), in the whole group. In patients with an unacceptable symptom state (ESSPRI score ≥ 5 points), a lower BRS score was observed in patients with both hyposalivation and ocular dryness (2.59 ± 0.69) than in patients with isolated hyposalivation (2.84 ± 0.84). The BRS score was also negatively associated with the WPAI-Daily Impairment and OHIP-14 scores in patients with hyposalivation as well as with HADS-A (the seven items of HADS relating to the anxiety dimension) and HADS-D (the seven items of HADS relating to the depression dimension) in the whole group. The results suggest that psychological resilience in pSS may be affected by recurrent parotitis, the levels of anxiety and depression, as well as hyposalivation with ocular dryness.

This study aimed to evaluate the shear bond strength (SBS) when bonding a universal resin cement to a disilicate glass-ceramic using different adhesive protocols. Sixty specimens were etched with 10% hydrofluoric acid (HF) for 20 s and assigned to one of four treatment protocols (n = 15): The Positive control protocol comprised use of a universal adhesive system + adhesive resin cement; the Test1 protocol comprised use of a new universal adhesive system + universal resin cement; the Test2 protocol comprised use of a silane coupling agent + universal resin cement; and the use of a universal resin cement without adhesive and silane served as the Negative control. One of the two resin cement cylinders built on each specimen in each group was used to test for 24-h SBS, while the other was thermocycled and then tested for SBS. Data were submitted to two-way ANOVA, Tukey's test, and Weibull analysis. The negative control (24 h) showed the lowest SBS mean value. The Test2 protocol resulted in the highest SBS mean value after thermocycling. Adhesive and mixed failures were prevalent in all groups. No statistical difference in m values was observed among the groups at 24 h. After thermocycling, the two Test protocols showed the highest m values. The m values were significantly lower after thermocycling than at 24 h for all groups. After thermal aging, The Test2 protocol resulted in a statistically significantly higher SBS mean value after thermal aging than seen for the other groups.

This study assessed the bond strength of resin-based restorative materials to fast-setting calcium silicate cement (Aarhus Uinversity, Denmark) when treated with each of two one-bottle universal adhesive systems. The cement surface (N = 256) was treated with a self-priming adhesive and a self-etch phosphate monomer-containing adhesive with and without etching of the cement surface. Specimens then received either resin composite or compomer restorative materials (n = 32). The bond strength was measured after 1 day and 1500 thermocycles (n = 16). The failure type was visually inspected. The cement-adhesive-restorative material interface was visualized using scanning electron microscopy (SEM). The data were analyzed using multiple linear regression. Restorative material type, resin adhesive system, and thermocycling had a statistically significant effect on the bond strength. Compomer restorative material and self-etch universal adhesive system demonstrated statistically significantly higher bond strength values to fast-setting calcium silicate cement, predominantly exhibiting cement cohesive failure. Etching the cement surface enhanced the bond strength of the self-priming universal adhesive. Thermocycling significantly reduced the bond strength. SEM showed self-etch universal adhesive seemingly diffused over the etched cement surface compared to other groups. Self-etch phosphate monomer-containing universal adhesive and compomer resulted in the highest bond strength to fast-setting calcium silicate cement.

In response to pro-inflammatory cytokines such as interleukin (IL)-1β, dental pulp fibroblasts produce various inflammatory mediators, including IL-6, IL-8, CC chemokine ligand 20 (CCL20), and CXC chemokine ligand 10 (CXCL10), leading to the progression of pulpitis. IL-17/IL-17A (IL-17A) is a pro-inflammatory cytokine secreted by T helper (Th) 17 cells following their recruitment to inflamed sites; however, the roles of IL-17A during pulpitis remain unclear. The purpose of this study was to investigate the effect of IL-17A on IL-6, IL-8, CCL20 and CXCL10 production by human dental pulp fibroblasts (HDPFs) in vitro. IL-17A at a concentration of 100 ng/ml induced the production of 10 times more IL-8 and 4 times more CXCL10, but not IL-6 and CCL20, compared to controls. Co-stimulation of HDPFs with IL-17A and IL-1β synergistically enhanced the production of IL-6, CCL20, IL-8 and CXCL10. IL-1β increased expression of IL-17 receptor/IL-17RA (IL-17R) on HDPFs. Moreover, the cell signal pathways of p38 mitogen-activated protein kinase (MAPK) and nuclear factor-κB (NF-κB) were more potently activated by simultaneous stimulation with IL-17A and IL-1β. These findings suggest that IL-17A participates in the progression of dental pulp inflammation through the enhanced production of inflammatory mediators in HDPFs.

Dental pulp inflammation is a common and significant factor related to poor dental prognosis. Current treatment strategies primarily concentrate on managing the inflammatory response, with specific targets for intervention still under investigation. Triggering receptors expressed on myeloid cells (TREMs) are a group of receptor molecules extensively present on myeloid cell surfaces, crucial in the regulation of inflammatory process. Our analysis of transcriptomic sequencing data from clinical pulp samples of dataset GSE77459 and animal models revealed up-regulation of Trem1 during pulpitis. Administration of the Trem1-blocking peptide LP17 led to lower (more than 1-fold) levels of several pro-inflammatory factors and inhibition of M1 macrophage polarization both in vivo and in vitro. This study of the expression patterns and functions of Trem1 in the development of dental pulp inflammation provides novel insights into the therapeutic strategies for clinical pulpitis.

Torture victims struggling with post-traumatic stress often experience elements in the dental treatment situation that may trigger trauma-related reactions. The aim of the study was to explore intervention strategies that will enable dental health workers to adapt dental treatment to the needs of torture survivors. Exploratory interviews were conducted with 10 torture-exposed resettled refugees with dental treatment experience in Norway. The data was analyzed using qualitative content analysis, which suggested that to minimize trauma-reactions, dental personnel should focus on creating a safe therapeutic space and strengthening the patient's sense of control. Four main categories of clinical advice were proposed: (i) Acquire knowledge about psychology, consequences of torture, cultural differences, trauma-informed care, and the patients' individual needs; (ii) Recognize the trigger-potential of busyness or delays; (iii) Avoid surprises, such as sudden moves or actions and explore triggers individually, but make sure not to evoke images of interrogation, and; (iv) Provide overview both with respect to visibility in the clinical room, and to predictability regarding the dental treatment. Although undergoing dental treatment may be challenging for torture-exposed individuals, it is possible to reduce the predicaments considerably by making feasible adaptions to the treatment and adopting a trauma-informed approach.

The aim of this study was to examine the expression of programmed death-ligand 1 (PD-L1) and of T cell immunoglobulin and mucin domain-containing protein (TIM3) in oral epithelial dysplasia and head and neck squamous cell carcinoma (HNSCC). Mouse HNSCC was induced with 4-nitroquinoline-1 oxide (4NQO). Oral epithelial dysplastic lesions, carcinoma in situ and HNSCC lesions were stained with anti-PD-L1 and TIM3 antibodies. The expression of PD-L1 and TIM3 in tumor cells and immune cells was semiquantitatively measured and compared. In parallel, human dysplasia and HNSCC were stained with anti-PD-L1 and anti-TIM3. The expression pattern of PD-L1 and TIM3 cells was further compared. In human and mouse samples both PD-L1 and TIM3 were found to be expressed in neoplastic and immune cells in HNSCC, but not in dysplasia. There was no significant difference in PD-L1 and TIM3 expression between metastatic and nonmetastatic HNSCC. We conclude that the 4NQO-induced mouse HNSCC model may be an excellent preclinical model for immune checkpoint therapy.

This study aimed to investigate the relationship between epigenetic mechanisms and oral mucositis (OM) in paediatric patients with acute lymphoblastic leukaemia. Oral cells were collected from 76 participants, including 15 healthy individuals, 10 patients with acute lymphoblastic leukaemia but without a history of OM and 51 acute lymphoblastic leukaemia patients with a history of OM (35 with active OM and 16 who had recovered from OM). Global DNA methylation in the miR-9-1 and miR-9-3 genes was performed. Seven polymorphisms rs1801131, rs1801133 (MTHFR), rs2228611 (DNMT1), rs7590760, rs1550117 (DNMT3A), rs6087990, rs2424913 (DNMT3B) were genotyped and an analysis of association with global DNA methylation was performed. The global methylation levels were lower in cancer patients recovered from OM than in the other groups. A higher frequency of unmethylated profile for miR-9-1 and partially methylated profile for miR-9-3 was observed in cancer patients regardless of OM history compared to healthy patients. The GG genotype of the rs2228611 (DNMT1) polymorphism was associated with higher levels of global methylation in cancer patients irrespective of OM. It was concluded that global methylation is associated with mucosal recovery. The effect of DNMT1 genotype on the global DNA methylation profile, as well as the methylation profile of miR-9-1 and miR-9-3 in cancer patients is independent of OM.

This study evaluated the changes in surface properties of three resin-based restorative materials after two laser-assisted, in-office tooth bleaching protocols using erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) or diode (980 nm) lasers. A nanohybrid composite (Enamel Plus HRi), a Bis-GMA-free composite (Enamel Plus HRi Bio Function), and a resin-matrix CAD-CAM ceramic (Shofu Block HC) were tested. Forty specimens for each material were prepared and divided into four groups (n = 10/group). The control specimens did not undergo any bleaching treatment, whereas group 2 received bleaching with 40% hydrogen peroxide (HO), while groups 3 and 4 underwent the same bleaching procedure with the use of diode (980 nm) or Er,Cr:YSGG lasers, respectively. Surface microhardness and roughness measurements were conducted using a Vickers tester and an optical profilometer. Microhardness was lower in bleached specimens, with the nanohybrid composite exhibiting the largest difference from the no bleaching group. For the Bis-GMA-free composite the microhardness difference between no bleaching and laser-assisted bleaching were smaller than seen for the conventional bleaching technique. Surface roughness was higher in bleached specimens, with nanohybrid composite showing the largest differences from the control specimens. The examined laser-assisted tooth bleaching protocols were found not to impact surface microhardness and roughness of the tested resin-based specimens and they are deemed suitable for clinical use.

This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.

This study evaluated the effect of solutions containing aminomethacrylate copolymer (AA) and sodium fluoride (F; 225 ppm F) or fluoride plus stannous chloride (FSn; 225 ppm F, 800 ppm Sn) against enamel and dentin erosion/abrasion. Solutions F, FSn, AA, F+AA, FSn+AA, and deionized water as negative control were tested. Bovine enamel and dentin specimens (n = 13/solution/substrate) underwent a set of erosion-abrasion cycles (0.3% citric acid [5 min, 4×/day], human saliva [1 h, 4×/day], brushing [15 s, 2×/day], and treatments [2 min, 2×/day]) for each of five days. Initial enamel erosion was evaluated using Knoop microhardness after the first and second acid challenge on day 1, and surface loss with profilometry after day 5. KOH-soluble fluoride was assessed. Data were analyzed with ANOVA/Tukey tests. The combination of fluoride and AA resulted in higher protection against enamel erosion, whereas this was not the case for the combination of AA and FSn. All treatments protected against enamel and dentin loss. The lowest surface loss values were observed with F+AA and FSn+AA. The polymer did not significantly influence the KOH-soluble fluoride formation on enamel/dentin specimens. The aminomethacrylate copolymer effectively enhanced the efficacy of sodium fluoride against initial erosion and improved the control of enamel and dentin wear of F and FSn solutions.

The study aimed to investigate the influence of HO-based and HO-free in-office bleaching on the surface and mechanical attributes of CAD/CAM composite blocks. CAD/CAM composite blocks from five different composite materials (CC1, CC2, CC3, CC4, and CC5) were randomly divided into two groups according to bleaching application (HO-based and HO-free). The surface topography, morphology, nanohardness, elastic modulus, flexural strength, and fracture toughness were measured. A paired and unpaired sample t-tests gauged the effect of pre- and post-bleaching on the substrates. The estimated mean differences (before-after bleaching) suggested an increase in surface roughness for two materials CC2 and CC4, and a significant decrease in nanohardness for material CC4 and in elastic modulus for materials CC2 and CC4 with HO-based bleaching, whereas HO-free bleaching resulted in changes compatible with no change in these properties. Flexural strength and fracture toughness showed no evidence of changes, irrespective of the bleaching gel used. Scanning electron microscopic analysis revealed erosive effects and micropore formation due to HO-based bleaching. HO-based bleaching deteriorates the surface of CAD/CAM composite materials while HO-free bleaching gel had an insignificant effect on both surface and bulk properties. The clinician should carefully evaluate the potential effects of HO-based bleaching on the surface properties of CAD/CAM composites.

Access cavity preparation represents the initial step in root canal treatment. Minimally invasive approaches have gained increasing attention and involve advancements in the traditional access cavity preparation. Simultaneously, the development of three-dimensional finite element analysis (3D-FEA) has provided a theoretical foundation for evaluating the merits and drawbacks of various access cavity preparations. Studies using static loading 3D-FEA have suggested that conservative access cavity preparation reduces the concentration of stress in the cervical region, thereby strengthening fracture resistance. However, the lack of support from clinical data raises concerns about the validity of this suggestion. Conversely, studies involving cyclic loading 3D-FEA and dynamic loading 3D-FEA have challenged the prevailing perspectives by taking into account additional factors such as filling materials, thus providing a more comprehensive understanding of the impact of access cavity preparation on fracture resistance. Existing research lacks a comprehensive comparison of the different 3D-FEA methods, and this review fills this gap by providing a systematic assessment of different 3D-FEA methods and their applications in access cavity preparation.

The present study aimed to evaluate whether epigenetic markers are expressed in the dental follicles surrounding ectopically erupting teeth. Twenty-one dental follicles were collected in 20 adolescent children through surgical exposure of ectopic teeth. The epigenetic modifications of DNA methylation and histone acetylation were evaluated by immunohistochemistry. The results showed cells positive for DNA-methyltransferase 1 (DNMT1), DNA methyltransferase 3 beta (DNMT3B), ten-eleven translocation-2 (TET2), acetyl-histone H3 (AcH3), acetyl-histone H4 (AcH4), 5-methylcytosine (5mC), and 5-hydroxymethylcytosine (5hmC) were present in all the samples. The levels of epigenetic markers representing active chromatin (5hmC, AcH3, AcH4, and TET2) were statistically significantly higher than those of markers representing inactive chromatin (5mC, DNMT3B, DNMT1). In conclusion, follicles in ectopic teeth display major epigenetic modifications. In the follicles, epigenetic markers associated with the activation of bone-related genes are more abundant than markers associated with the inactivation of bone-related genes.