The reflectance and transmittance of Si and GaAs wafers irradiated by a 6 ns pulsed, 532 nm laser have been studied for s- and p-polarized 250 GHz radiation as a function of laser fluence and time. The measurements were carried out using precision timing of the and signals, allowing an accurate determination of the absorptance where . Both wafers had a maximum reflectance above 90% for a laser fluence . Both also showed an absorptance peak of ~50% lasting ~2 ns during the risetime of the laser pulse. Experimental results were compared with a stratified medium theory using the Vogel model for the carrier lifetime and the Drude model for permittivity. Modeling showed that the large absorptance at the early part of the rise of the laser pulse was due to the creation of a lossy, low carrier density layer. For Si, the measured and were in very good agreement with theory on both the nanosecond time scale and the microsecond scale. For GaAs, the agreement was very good on the nanosecond scale but only qualitatively correct on the microsecond scale. These results may be useful for planning applications of laser driven semiconductor switches.

Recently, we introduced a Portable HAndheld Spectral Reflection (PHASR) Scanner to allow THz Time-Domain Spectroscopic (THz-TDS) imaging in clinical and industrial settings using a fiber-coupled and alignment-free telecentric beam steering design. The key limitations of the version 1.0 of the PHASR Scanner were its field-of-view and speed of time-domain trace acquisition. In this paper, we address these limitations by introducing a heliostat geometry for beam scanning to achieve an extended field-of-view, and by reconfiguring the Asynchronous OPtical Sampling (ASOPS) system to perform Electronically Controlled OPtical Sampling (ECOPS) measurements. The former change improved the deflection range of the beam, while also drastically reducing the coupling of the two scanning axes, the combination of which resulted in a larger than four-fold increase in the FOV area. The latter change significantly improves the acquisition speed and frequency domain performance simultaneously by improving measurement efficiency. To accomplish this, we characterized the non-linear time-axis sampling behavior of the electro-mechanical system in the ECOPS mode. We proposed methods to model and correct the non-linear time-axis distortions and tested the performance of the high-speed ECOPS trace acquisition. Therefore, here we introduce the PHASR Scanner version 2.0, which is capable of imaging a 40×27 mm FOV with 2000 traces per second over a 100 picosecond TDS range. This new scanner represents a significant leap towards translating the THz-TDS technology from the lab bench to the bedside for real-time clinical imaging applications.

A system concept for online alignment verification of millimeter-wave, corneal reflectometry is presented. The system utilizes beam scanning to generate magnitude-only reflectivity maps of the cornea at 650 GHz and compares these images to a precomputed/measured template map to confirm/reject sufficient alignment. A system utilizing 5 off-axis parabolic mirrors, a thin film beam splitter, and 2-axis galvanometric mirror was designed, simulated, and evaluated with geometric and physical optics. Simulation results informed the construction of a demonstrator system which was tested with a reference reflector. Similarity metrics computed with the aligned template and 26 misaligned positions, distributed on a 0.5 mm x 0.5 mm x 0.5 mm mesh, demonstrated sufficient misalignment detection sensitivity in 23 out of 26 positions. The results show that positional accuracy on the order of 0.5 mm is possible using 0.462 mm wavelength radiation due to the perturbation of coupling efficiency via beam distortion and beam walk-off.

We describe the application of the Discrete Wavelet Transform (DWT) in extracting the characteristic absorption signatures of materials from terahertz reflection spectra. We compare the performance of different mother wavelets, including Daubechies, Least Asymmetric (LA), and Coiflet, based on their phase and gain functions and filter lengths. We show that the phase functions of the wavelet and scaling filters result in spectral shifts to the absorption lines in the wavelet domain. We provide a solution by calculating advancement coefficients necessary to achieve effective zero-phase-function DWT. We demonstrate the utility of this signal processing technique using -lactose monohydrate/polyethylene samples with different levels of rough surface scattering. In all cases, the DWT-based algorithm successfully extracts resonant signatures at 0.53 and 1.38 THz, even when they are obscured by the rough surface scattering effects. The DWT analysis with accompanying phase corrections can be utilized as a robust technique for material identification in non-destructive evaluation (NDE) using terahertz spectroscopy.

This paper proposes a new dimension reduction algorithm based on low-dimension ordered orthogonal projection (LOOP), which is used for cancer detection with terahertz (THz) images of freshly excised human breast cancer tissues. A THz image can be represented by a data cube with each pixel containing a high dimension spectrum vector covering several THz frequencies, where each frequency represents a different dimension in the vector. The proposed algorithm projects the high-dimension spectrum vector of each pixel within the THz image into a low-dimension subspace that contains the majority of the unique features embedded in the image. The low-dimension subspace is constructed by sequentially identifying its orthonormal basis vectors, such that each newly chosen basis vector represents the most unique information not contained by existing basis vectors. A multivariate Gaussian mixture model is used to represent the statistical distributions of the low-dimension feature vectors obtained from the proposed dimension reduction algorithm. The model parameters are iteratively learned by using unsupervised learning methods such as Markov chain Monte Carlo or expectation maximization, and the results are used to classify the various regions within a tumor sample. Experiment results demonstrate that the proposed method achieves apparent performance improvement in human breast cancer tissue over existing approaches such as one-dimension Markov chain Monte Carlo. The results confirm that the dimension reduction algorithm presented in this paper is a promising technique for breast cancer detection with THz images, and the classification results present a good correlation with respect to the histopathology results of the analyzed samples.

Terahertz (THz) imaging of corneal tissue water content (CTWC) is a proposed method for early, accurate detection and study of corneal diseases. Despite promising results from and cornea studies, interpretation of the reflectivity data is confounded by the contact between corneal tissue and rigid dielectric window used to flatten the imaging field. This work develops a novel imaging system and image reconstruction methods specifically for nearly spherical targets such as human cornea. A prototype system was constructed using a 650 GHz multiplier source and Schottky diode detector. Resolution and imaging field strength measurement from characterization targets correlate well with those predicted by the quasioptical theory and physical optics analysis. Imaging experiments with corneal phantoms and corneas demonstrate the hydration sensitivity of the imaging system and reliable measurement of CTWC. We present successful acquisition of non-contact THz images of human cornea, and discuss strategies for optimizing the imaging system design for clinical use.

Reflection mode Terahertz (THz) imaging of corneal tissue water content (CTWC) is a proposed method for early, accurate detection and study of corneal diseases. Despite promising results from and cornea studies, interpretation of the reflectivity data is confounded by the contact between corneal tissue and dielectric windows used to flatten the imaging field. Herein, we present an optical design for non-contact THz imaging of cornea. A beam scanning methodology performs angular, normal incidence sweeps of a focused beam over the corneal surface while keeping the source, detector, and patient stationary. A quasioptical analysis method is developed to analyze the theoretical resolution and imaging field intensity profile. These results are compared to the electric field distribution computed with a physical optics analysis code. Imaging experiments validate the optical theories behind the design and suggest that quasioptical methods are sufficient for designing of THz corneal imaging systems. Successful imaging operations support the feasibility of non-contact imaging. We believe that this optical system design will enable the first, clinically relevant, exploration of CTWC using THz technology.

Infrared (IR) and Terahertz (THz) spectroscopy simulations were carried out using CHARMM35b2 to determine protein stability. The stabilities of three bacterial cold shock proteins (Csps) originating from mesophiles, thermophiles and hyper- thermophiles respectively were investigated in this study. The three different Csps were investigated by Normal-Mode analysis and Molecular Dynamics simulation of THz spectra using the Hessian matrix for solvated systems, interpreted in the harmonic approximation at optimum near-melting temperatures of each homologue, by incorporating differences in the hydrous and anhydrous states of the Csps. The results show slight variations in the large scale protein motion. However, the IR spectra of Csps observed at the low frequency saddle surface region, clearly distinguishes the thermophilic and mesophilic proteins based on their stability. Further studies on protein stability employing low-frequency collective modes have the potential to reveal functionally important conformational changes that are biologically significant.

A pulsed terahertz (THz) imaging system and millimeter-wave reflectometer were used to acquire images and point measurements, respectively, of five rabbit cornea . These imaging results are the first ever produced of cornea. A modified version of a standard protocol using a gentle stream of air and a Mylar window was employed to slightly dehydrate healthy cornea. The sensor data and companion central corneal thickness (CCT) measurements were acquired every 10-15 min over the course of two hours using ultrasound pachymmetry.. Statistically significant positive correlations were established between CCT measurements and millimeter wave reflectivity. Local shifts in reflectivity contrast were observed in the THz imagery; however, the THz reflectivity did not display a significant correlation with thickness in the region probed by the 100 GHz and CCT measurements. This is explained in part by a thickness sensitivity at least 10× higher in the mm-wave than the THz systems. Stratified media and effective media modeling suggest that the protocol perturbed the thickness and not the corneal tissue water content (CTWC). To further explore possible etalon effects, an additional rabbit was euthanized and millimeter wave measurements were obtained during death induced edema. These observations represent the first time that the uncoupled sensing of CTWC and CCT have been achieved .

Terahertz (THz) spectral properties of human cornea are explored as a function of central corneal thickness (CCT) and corneal water content, and the clinical utility of THz-based corneal water content sensing is discussed. Three candidate corneal tissue water content (CTWC) perturbations, based on corneal physiology, are investigated that affect the axial water distribution and total thickness. The THz frequency reflectivity properties of the three CTWC perturbations were simulated and explored with varying system center frequency and bandwidths (Q-factors). The modeling showed that at effective optical path lengths on the order of a wavelength the cornea presents a lossy etalon bordered by air at the anterior and the aqueous humor at the posterior. The simulated standing wave peak-to-valley ratio is pronounced at lower frequencies and its effect on acquired data can be modulated by adjusting the bandwidth of the sensing system. These observations are supported with experimental spectroscopic data. The results suggest that knowledge of corneal thickness can be utilized for accurate assessments of corneal tissue water content. The physiologic variation of corneal thickness with respect to the wavelengths spanned by the THz band is extremely limited compared to all other structures in the body making CTWC sensing unique amongst all proposed applications of THz medical imaging.

The application of THz to medical imaging is experiencing a surge in both interest and federal funding. A brief overview of the field is provided along with promising and emerging applications and ongoing research. THz imaging phenomenology is discussed and tradeoffs are identified. A THz medical imaging system, operating at ~525 GHz center frequency with ~125 GHz of response normalized bandwidth is introduced and details regarding principles of operation are provided. Two promising medical applications of THz imaging are presented: skin burns and cornea. For burns, images of second degree, partial thickness burns were obtained in rat models over an 8 hour period. These images clearly show the formation and progression of edema in and around the burn wound area. For cornea, experimental data measuring the hydration of porcine cornea under drying is presented demonstrating utility in ophthalmologic applications.

Dynamic nuclear polarization (DNP) increases the sensitivity of nuclear magnetic resonance (NMR) spectroscopy by using high frequency microwaves to transfer the polarization of the electrons to the nuclear spins. The enhancement in NMR sensitivity can amount to a factor of well above 100, enabling faster data acquisition and greatly improved NMR measurements. With the increasing magnetic fields (up to 23 T) used in NMR research, the required frequency for DNP falls into the THz band (140-600 GHz). Gyrotrons have been developed to meet the demanding specifications for DNP NMR, including power levels of tens of watts; frequency stability of a few megahertz; and power stability of 1% over runs that last for several days to weeks. Continuous gyrotron frequency tuning of over 1 GHz has also been demonstrated. The complete DNP NMR system must include a low loss transmission line; an optimized antenna; and a holder for efficient coupling of the THz radiation to the sample. This paper describes the DNP NMR process and illustrates the THz systems needed for this demanding spectroscopic application. THz DNP NMR is a rapidly developing, exciting area of THz science and technology.