Blue-green infrastructure (BGI) reduce urban combined sewer overflows (CSOs) and stormwater outlets (SWOs). However, most conventional BGI are not designed to remove trace organic contaminants. Little is known about the potential of conventional BGI to improve surface water quality by reducing the discharge of trace organic contaminants. We derived wash-off loads for street runoff (6PPD-q, DPG, and HMMM), construction materials (diuron), and wastewater-derived contaminants (diclofenac) based on measurements in the combined sewer system. Subsequently, the performance of four BGI types (bioretention cells, green roofs, porous pavements, and urban wetlands) to reduce the discharge of trace organic contaminants via SWOs and CSOs was quantified with a hydrodynamic SWMM model. Moreover, the catchment-wide impact of SWOs and CSOs on surface water was assessed using risk quotients. We found that the annually discharged load can be considerably reduced by implementing BGI. Among the studied BGI types, bioretention cells are the most effective, with a load reduction of up to 80% to surface waters, mainly due to a larger suitable implementation area and a substantial stormwater infiltration. BGI implemented in the separate sewer system are more effective in reducing stormwater contaminant loads than BGI in the combined system. The assessment of the risk quotient in the surface water showed that the concentrations during SWO and CSO discharges exceed the acute environmental threshold in the surface water for 6PPD-q, DPG, diuron, and diclofenac during several events. The implementation of BGI reduced the hours of exceeded risk quotient in the surface water by 93% for bioretention cells. These findings underscore the need for a catchment-wide assessment of future BGI implementations to quantify, manage, and mitigate the impacts of urban pollution.

Lanthanum-modified-bentonite(LMB) has been applied for eutrophication management as a phosphate(P)-binding agent in many lakes. However, re-eutrophication took place several years or decades later after the first practice of capping due to dynamic environmental factors in the plateau lake. Here, we investigated the effect of long-term capping and integrated environmental factors in the plateau lake including alkalinity, organic matter, disturbance and photodegradation to the LMB immobilization. Long-term LMB immobilization exhibited C accumulation(82.3%), La depletion(53.5%) and lager size effect in the sediment particle, indicating the breakage of La-O-P bonds and the formation of La-O-C bonds over immobilization time. Additionally, pH(8-10) in the plateau lake could enhance the P desorption and decrease P adsorption through electrostatic repulsion enhancement with the zeta potential reduction(7.2 mV). Further disturbance experiment indicated a significant releasing trend of active P and DGT-labile P from the solid phase, pore water to the overlying water after disturbances due to resuspended releasing, particle size and amorphous Fe, Mn and Al's redistribution. Moreover, P NMR and EPR results indicated photodegradation after disturbance converted diester phosphate into orthophosphate with long-term LMB immobilization via the oxidation of ·OH in the sediment of the plateau lake. Therefore, management issues for Xingyun Lake may apply to other plateau lakes with low external P input, intermediate depth and intense disturbance.

This study introduces a novel S-nitrosothiol based method for the rapid and highly selective detection of nitrite in complex water matrices. Sodium 3-mercapto-1-propanesulfonate forms a distinctive pink S-nitrosothiol compound upon interaction with nitrite in acidic media, allowing both visual and quantitative detection. Various factors affecting the absorbance of the final product were investigated, including pH, reaction time, acid type, and sodium 3-mercapto-1-propanesulfonate concentration. UV-Vis spectrophotometric analysis demonstrated an excellent linear correlation (R = 0.99) across a broad detection range (0.05 to 80 mmol l), while showing no interference from common ions such as nitrate or dissolved organic matter, a limitation frequently observed in conventional UV-based nitrite detection methods. The assay was further adapted into a pellet form to simplify field use, operating effectively at room temperature with a low detection limit (1.4 ppm). The S-nitrosothiol based method represents a safer and more environmentally friendly option for nitrite detection and shows a promising potential as a valuable addition to both field and laboratory water testing kits for nitrite analysis.

High solid anaerobic digestion (HSAD) achieves the benefits of high volumetric loading rates and lower reject water production, which, however, results in much more concentrated reject water with a remarkable increase in organics and nitrogen compared with that from conventional AD with low solid content. The high concentrations of ammonium (2000-3500 mg/L) and COD (3000-4000 mg/L) were reported to exert inhibition on anammox bacteria (AnAOB), posing challenges to the application of the partial nitritation/anammox (PN/A). To date, no cases of PN/A process start-up for sludge HSAD reject water were reported. This study demonstrated the start-up process of a 480 m/d PN/A project without anammox sludge inoculation and treating HSAD reject water from a centralized dewatered sludge treatment plant. The project did not construct new infrastructures but utilized previously constructed tanks to upgrade the process from existing short-cut nitrification-denitrification to a two-stage PN/A process. Although no external anammox sludge inoculation was performed to save seeding sludge cost, the start-up was successfully achieved in about 9 months (273 days) based on a three-step method of "AnAOB enrichment - sludge acclimation - capacity doubling". During start-up, the relative abundance of AnAOB (Candidatus_) increased from near zero to 12.0%. After start-up, the total inorganic nitrogen (TIN) removal load reached 0.74 kgN/(m•d), with a total nitrogen removal efficiency of over 90%. Compared to the traditional nitrification-denitrification process, the PN/A process remarkably reduces the addition of organic chemicals and aeration energy consumption, saving approximately 4.2 million yuan (RMB) in operational costs annually. In summary, this research provides a full-scale reference for the start-up of the PN/A process treating sludge HSAD reject water.

Anammox granular sludge (AnGS) serves as an important platform for cost-effective nitrogen removal from wastewater. Different to the traditionally sphere-like granules, a novel type of AnGS in a unique ellipsoid-like shape was obtained through enhancing shear force. The ellipsoid-like AnGS significantly exhibited a smaller aspect ratio (-25.1 %) and granular size (-11.8 %), compared to traditional sphere-like AnGS ( < 0.01). Comprehensive comparisons showed that ellipsoid-like AnGS possessed a significantly higher extracellular polymeric substances (EPS) content and strength, as well as an enhanced mass transfer and a higher viable bacteria proportion due to the larger substrate permeable zone ( < 0.01). Additionally, the anammox bacterial abundance ( Kuenenia) was 12.2 % higher in ellipsoid-like AnGS than in sphere-like AnGS. All these characteristics of ellipsoid-like AnGS jointly increased the specific anammox activity by 29.0 % and nitrogen removal capacity by 22.6 %, compared to sphere-like AnGS. Further fluid field simulation suggested the enhanced flow shear on the side surface of AnGS likely drove the formation of ellipsoid-like AnGS. The higher shear force on the side surface led to an increase of EPS content (especially hydrophobic protein) and elastic modulus, thus constraining lateral expansion. This study sheds light on impacts of granular shape, an overlooked morphological factor, on anammox performance. The ellipsoid-like AnGS presented herein also offers a unique and promising aggregate to enhance anammox performance.

Transitions between free-surface and pressurized flows, known as transient mixed flows, have posed significant challenges in urban drainage systems (UDS), e.g., pipe bursts, road collapses, and geysers. However, traditional mechanistic modeling for mixed flows is challenged by the difficult integration of multi-source data, complex equation forms for the discovery of dynamic processes, and high computational demands. In response, we proposed a data-driven model, TMF-PINN, which utilizes a Physics-Informed Neural Network (PINN) to simulate and invert Transient Mixed Flow (TMF) in sewer networks. This model integrates experimental data, simulation results and Partial Differential Equations (PDEs) into its loss function, leveraging the extensive data available in smart urban water systems. A status factor () has been introduced to seamlessly link open channel and pressurized flow dynamics, facilitating rapid adjustments in wave speed. On this basis, Fourier feature extraction and quadratic neural networks have been employed to capture complex dynamic processes featuring high-frequency. Validation through three classical cases using the Storm Water Management Model (SWMM) and comparisons with finite volume Harten-Lax-van Leer (HLL) solver reveal that the proposed model circumvents the constraints of spatiotemporal resolution, yielding accurate flow field predictions.

Water treatment residual (WTR) is a burden for many water treatment plants due to the large volumes and associated management costs. In this study, we transform aluminum-salt WTR (Al-WTR) into ceramsite (ASC) to recover phosphate from challenging waters. ASC showed remarkably higher specific surface area (SSA, 70.53 m/g) and phosphate adsorption capacity (calculated 47.2 mg P/g) compared to previously reported ceramsite materials (< 40 m/g SSA and < 20 mg P/g). ASC recovered over 94.9% of phosphate across a wide pH range (3 - 11) and generally sustained > 90% of its phosphate recovery at high concentrations of competing anions (i.e., Cl, F, SO , or HCO ) or humic acid (HA). We challenged the material with real municipal wastewater at 10°C and achieved simultaneous phosphate (>97.1%) and COD removal (71.2%). Once saturated with phosphate, ASC can be repurposed for landscaping or soil amendment. The economic analysis indicates that ASC can be a competitive alternative to natural clay-based ceramsite, biochar, or other useful materials. Therefore, ASC is an eco-friendly, cost-effective adsorbent for phosphate recovery from complex waters, shedding light upon a circular economy in the water sector.

UV light emitting diode (LED) disinfection technologies have advanced over the last decade and expanded the design space for applications in point of use, industrial, and now full-scale water treatment. This literature review examines the progression of UV LED technologies from 2007 to 2023 using key features such as total optical power, price, and wall-plug efficiency. The review found that optical power is increasing while the price per Watt is decreasing; however, the wall plug energy (WPE) is slowly improving over the last decade. These factors govern the feasibility of many UV LEDs applications and establish the current state of the art for these technologies. An analysis of inactivation rate constants for low-pressure, medium-pressure, and UV LED sources was undertaken and provides a comprehensive view of how current UV LED technologies compare to traditional technologies. This comparison found that UV LEDs perform comparably vs conventional UV technologies when disinfecting bacteria and viruses. Furthermore, comparison of reported reduction equivalent fluences for UV LED flow-through reactors at the bench-, pilot-, and full-scale were explored in this review, and it was found that LED treatment is becoming more effective at handling increased flowrates and has been proven to work at full-scale. UV LEDs do however require additional research into the impacts of water matrices at different wavelengths and the impact that each available LED wavelength has on disinfection. Overall, this work provides a broad assessment of UV disinfection technologies and serves as a state-of-the-art reference document for those who are interested in understanding this rapidly developing technology.

Linear alkylbenzene sulfonate (LAS) can be thoroughly mineralized within sufficient oxygen (O), but which is energy intensive and may causes serious foaming problem. Although cometabolism can achieve efficient LAS removal within a wide range of O dosages, how O dosage systematically affects LAS metabolic pathway is still unclear. Here, membrane aerated biofilm reactor (MABR) enabled accurate O delivery and bulk dissolved oxygen (DO) control. MABR achieved efficient removal of LAS (>96.4 %), nitrate (>97.8 %) and total nitrogen (>96.2 %) at the three target DO conditions. At high DO condition (0.6 mg/L), LAS was efficiently removed by aerobic mineralization (predominant) coupled with aerobic denitrification biodegradation with the related functional enzymes. , and were dominant genus contributing to four possible LAS aerobic metabolic pathways. As O dosage reduced to only 29.7 % of the demand for LAS mineralization, O facilitated LAS activation, benzene-ring cleavage and a portion of respiration. NO -N respiration-induced anaerobic denitrification also contributed to ring-opening and organics mineralization. and related two possible anaerobic metabolic pathways also contributed to LAS removal. The findings provide a promising strategy for achieving low-cost high LAS-containing greywater treatment.

Bacterial cooperation is very important for anammox bacteria which perform low-carbon and energy-efficient nitrogen removal, yet its variation to adapt to high NH -N concentration in actual wastewater treatment plants (WWTPs) remains unclear. Here, we found wide and varied cross-feedings of anammox bacteria and symbiotic bacteria in the two series connected full-scale reactors with different NH -N concentrations (297.95 ± 54.84 and 76.03 ± 34.01 mg/L) treating sludge digester liquor. The uptake of vitamin B6 as highly effective antioxidants secreted by the symbiotic bacteria was beneficial for anammox bacteria to resist the high NH -N concentration and varied dissolved oxygen (DO). When NH -N concentration in influent (1785.46 ± 228.5 mg/L) increased, anammox bacteria tended to reduce the amino acids supply to symbiotic bacteria to save metabolic costs. A total of 26.1% bacterial generalists switched to specialists to increase the stability and functional heterogeneity of the microbial community at high NH -N conditions. V/A-type ATPase for anammox bacteria to adapt to the change of NH -N was highly important to strive against cellular alkalization caused by free ammonia. This study expands the understanding of the adjusted bacterial cooperation within anammox consortia at high NH -N conditions, providing new insights into bacterial adaptation to adverse environments from a sociomicrobiology perspective.

Magnetite (FeO) particles have been widely reported to enhance the anammox's activity in anammox granular sludge (AnGS), yet the underlying mechanisms remain unclear. This study demonstrates that both FeO microparticles (MPs) and nanoparticles (NPs) at a dosage of 200 mg FeO/L significantly increased the specific anammox activity (SAA) of AnGS. Additionally, the transcriptional activities of the and genes involved in the anammox process, as well as the heme content in AnGS, were also notably enhanced. Notably, FeO NPs were more effective than MPs in boosting anammox activity within AnGS. Mechanistically, FeO MPs released free iron, which anammox bacteria utilized to promote the synthesis of key enzymes, thereby enhancing their activity. Compared to MPs, FeO NPs not only elevated the synthesis of these key enzymes to a higher level but also induced a nanofluids effect on the surface of AnGS, improving substrate permeability and accessibility to intragranular anammox bacteria. Moreover, the nanofluids effect was identified as the primary mechanism through which FeO NPs enhanced anammox activity within AnGS. These findings provide new insights into the effects of nanoparticles on granular sludge systems, extending beyond AnGS.

The rapid expansion of coastal aquaculture has led to an increase in the coverage of aquaculture ponds, where intense feed-derived nitrogen is causing significant emissions of nitrous oxide (NO). Multiple NO production pathways and the relative importance of water column vs. sedimentary production in aquaculture ponds remain uncertain. Clarifying these pathways is vital for sustainable aquaculture development. Using N-labeled dissolved inorganic nitrogen, the pathways and rates of NO production in subtropical aquaculture ponds located in south China, cultivating whiteleg shrimp, Japanese seabass, and giant river prawn, were successfully characterized. Total NO production rates ranged from 6 to 70 µmol-N m d, with the shrimp pond exhibiting the highest total NO production rates, followed by ponds for seabass and prawn. These differences are primarily due to varying feed amounts causing differences in dissolved nutrients in water column and sediment. Particularly, nutrient and organic matter accumulation at the surface sediment stimulated NO production. The oxygenated sediment on a centimeter scale could produce substantially more NO compared to the water column above on a meter scale. Partial denitrification, i.e., nitrate and nitrite reduction to NO, was more important (> 60 %) for NO production in aquaculture ponds. The availability of nitrite is likely a major factor driving partial denitrification for both sedimentary and water column NO production.

Climate change is driving global endeavours to achieve carbon neutrality and renewable energy expansion. Sludge, a nutrient-rich waste, holds energy potential yet poses environmental challenges that need proper management. We conducted a comprehensive life cycle assessment to evaluate the energy balance and environmental footprint of the most commonly used sludge management scenarios in BRICS countries, namely Brazil, Russia, India, China, and South Africa. Technologies such as incineration and anaerobic digestion with energy recovery units (i.e., cogeneration unit) maximize energy balance and minimize the environmental footprint, with incineration showing a superior performance. Shifting sludge management scenarios from the worst to the best can boost energy production by 1.4-98.4 times and cut the environmental footprint by 1.5-21.4 times. In 2050, these improvements could lead to a 98-fold boost in energy generation and a 25-fold drop in carbon emissions, according to the Announced Pledges Scenarios. Optimizing parameters such as volatile solids and anaerobic digestion efficiency further boosts energy output and minimizes the environmental footprint. This study offers robust evidence to support sustainable sludge management and thus promote energy recovery and carbon neutrality goals, guide technological transitions, and inform policymaking for sustainable development.

Dosing iron salts is a widely adopted strategy for sewer odor and corrosion management, and it can affect bioenergy recovery during anaerobic digestion (AD) of sludge in downstream wastewater treatment plants. However, the different impacts of in-sewer iron salt dosing on AD, depending on the types of iron and digestion conditions, remain unclear. Therefore, this study investigated the impact of in-sewer ferrous (Fe(II)) and ferrate (Fe(VI)) dosing on bioenergy recovery in both conventional AD and AD with thermal hydrolysis pretreatment (THP). The results showed that in-sewer Fe(VI) dosing notably enhanced methane production in AD more than in-sewer Fe(II) dosing, with cumulative methane yields of 197.1±1.9 mLCH∙gVSadded for Fe(VI) and 186.5±10.4 mLCH∙gVSadded for Fe(II), respectively. Microbial analyses and iron particle characterizations suggested that the superior promotion with Fe(VI) dosing may be attributed to the smaller particle sizes and higher iron oxide content of Fe(VI) resultant products. This led to a greater enhancement in direct interspecies electron transfer (DIET) between syntrophic bacteria and methanogens, as indicated by the upregulation of and key functional genes involved in CO-utilizing methanogenesis. Additionally, in THP-AD, the methane production enhancement caused by in-sewer iron dosing (35.5 mLCH∙gVSadded) exceeded that in conventional AD (26.9 mLCH∙gVSadded), although organic degradation during THP was unaffected. As THP-AD gains popularity for improved bioenergy recovery from sludge, our findings suggest that in-sewer iron dosing supports this advancement. Furthermore, in-sewer Fe(VI) dosing appears more promising within integrated wastewater management strategies, facilitating energy- and carbon-neutralization of urban water systems.

Efficient carbon use is crucial for biological nitrogen removal. Traditional aerobic processes can waste carbon sources, exacerbating carbon deficiency. This study explores an anaerobic/oxic/anoxic system with sludge double recirculation to improve nitrogen removal in low C/N wastewater. This system integrated aerobic nitrification after the carbon intracellular storage, separating carbon and nitrogen by denitrifying glycogen-accumulating organisms (DGAOs) with endogenous partial denitrification and Anammox within the anoxic units. A significant efficiency of 91.02±7.01% chemical oxygen demand (COD) was converted into intracellular carbon in anaerobic units, significantly reducing carbon futile oxidation in the aerobic units by effectively separating COD from ammonia. Intracellular storage of carbon sources and microbial adaptation to carbon scarcity prevent futile oxidation of COD in the aerobic units even with short-term high dissolved oxygen (DO), thereby enhancing nitrogen removal under anoxic conditions with sufficient intracellular carbon source. The microbial analysis identified as the dominant anammox bacteria, in combination with the activity of DGAOs and other related microbial communities, accounting for 37.0% of the TN removal. Consequently, the system demonstrated remarkable nitrogen removal efficiencies, achieving 81.3±3.3% for total nitrogen (TN) and 98.5±0.9% for ammonia nitrogen while maintaining an effluent COD concentration of 17.2±9.1 mg/L, treating the low C/N of 4.18 in the influent wastewater. The findings in this study provide a sustainable and energy-saving technique for conventional WWTPs to meet strict discharge standards by avoiding futile oxidation of COD and encouraging anammox contributions.

Freshwater biodiversity is increasingly threatened by dams and many other anthropogenic stressors, yet our understanding of the complex responses of different biotas and their multiple facets remains limited. Here, we present a multi-faceted and integrated-indices approach to assess the differential responses of freshwater biodiversity to multiple stressors in the Yangtze River, the third longest and most dam-densely river in the world. By combining individual biodiversity indices of phytoplankton, zooplankton, periphyton, macroinvertebrates, and fish with a novel integrated aquatic biodiversity index (IABI), we disentangled the effects of hydrology, water quality, land use, and natural factors on both α and β diversity facets in taxonomic, functional, and phylogenetic dimensions. Our results revealed that phytoplankton and fish species and functional richness increased longitudinally, while fish taxonomic and phylogenetic β diversity increased but phytoplankton and macroinvertebrate β diversity remained unchanged. Hydrology and water quality emerged as the key drivers of all individual biodiversity indices, followed by land use and natural factors, with fish and phytoplankton showed the strongest responses. Importantly, we found that natural, land use, and hydrological factors indirectly affected biodiversity by altering water quality, which in turn directly influenced taxonomic and phylogenetic IABIs. Our findings highlight the complex interplay of multiple stressors in shaping freshwater biodiversity and underscore the importance of considering both individual and integrated indices for effective conservation and management. We propose that our multi-faceted and integrated-indices approach can be applied to other large, dam-modified river basins globally.

Extracellular polymeric substances (EPS) play a crucial role in the aggregation of partial denitrification (PD) consortia, as EPS is closely linked to bioreactor performance. However, the structural and compositional properties of EPS from PD consortia have not yet been investigated. In this study, photometric measurements indicated that PD consortia contained significantly more EPS (168.81 ± 2.10 mg/g VSS) compared to conventional activated sludge (79.79 mg/g VSS). The EPS of PD consortia exhibited a significant predominance of proteins over polysaccharides, with a protein/polysaccharide ratio of 1.43 ± 0.10. FTIR analysis revealed that the EPS of PD consortia contained fewer hydrophilic functional groups, particularly carboxyl and carbonyl groups, indicating a high aggregation potential. The content comparison of EPS and functional groups across three stratified EPS subfractions from PD consortia consistently followed the sequence: TB-EPS > LB-EPS > S-EPS. XPS results corroborated the FTIR findings and the protein/polysaccharide ratio determined by photometric measurements, all of which suggested that the EPS of PD consortia exhibited a higher abundance of hydrophobic functional groups. However, the higher -helix/(-sheet + random coil) ratio (0.99) suggested that the proteins in PD consortia had a compact structure, making inner hydrophobic groups difficult to expose. This compact protein structure could limit aggregation among bacterial cells, indicating the need for process optimization to enhance sludge aggregation in PD-related processes. Overall, understanding the aggregation characteristics of PD consortia could improve the application of PD-based processes.

Microalgae biofilm has garnered significant attention from researchers in the field of sewage treatment due to its advantages such as ease of collection and stable sewage treatment capabilities. Using agricultural waste as biofilm carriers has become a hotspot in reducing costs for this method. This study first combined with loofah to form a microalgae biofilm for the study of periodic nitrogen and phosphorus removal from municipal wastewater. The biofilm could stably treat 7 batches of wastewater within one month. The removal rate of TP almost reached 100 %, while the removal rates of NH and TN both reached or exceeded 80 %. The average biomass yield over 25 days was 102.04 mg/L/day. The polysaccharide content increased from 8.61 % to 16.98 % during the cyclic cultivation. The lipid content gradually decreased from 40.91 to 26.1 %. The protein content increased from 32.93 % in the initial stage to 41.18 % and then decreased to 36.31 % in the later stage. During the mid-stage of culturing, the richness of anaerobic bacteria decreased, while the richness of aerobic and facultative bacteria increased, which was conducive to the construction of the microalgae-bacteria symbiotic system and steadily improved the effect of nitrogen and phosphorus removal. As the culturing progressed, the that emerged during the mid-stage gradually damaged the biofilm over time, leading to a decline in the effectiveness of sewage treatment in the later stages. This study offers technical support for carrier selection in microalgae biofilm methods and for the periodic removal of nitrogen and phosphorus from wastewater.

Due to the large amounts of pharmaceuticals and personal care products (PPCPs) currently being consumed and released into the environment, this study provides a comprehensive analysis of pharmaceutical pollution in both raw and treated water from full-scale drinking water treatment plants nationwide. Our investigation revealed that 30 out of 37 PPCPs were present in raw water with mean concentrations ranging from 0.01-131 ng/L. The raw water sources, surface water (ND - 147 ng/L), subsurface water (ND - 123 ng/L) and reservoir sources (ND - 135 ng/L) exhibited higher mean concentration levels of pharmaceutical residues compared to groundwater sources (ND - 1.89 ng/L). Meanwhile, in treated water, 17 of the 37 analyzed PPCPs were present with carbamazepine, clarithromycin, fluconazole, telmisartan, valsartan, and cotinine being the most common (detection frequency > 40 %), and having mean concentrations of 1.22, 0.12, 3.48, 40.1, 6.36, and 3.73 ng/L, respectively. These findings highlight that, while water treatment processes are effective, there are some persistent compounds that prove challenging to fully eliminate. Using Monte Carlo simulations, risk assessment indicated that most of these compounds are likely to have negligible impact on human health, except for the antihypertensives. Telmisartan was identified as posing the highest ecological risk (RQ > 1), warranting further investigation, and monitoring. The study concludes by prioritizing specific 14 pharmaceuticals, including telmisartan, clarithromycin, lamotrigine, cotinine, lidocaine, tramadol, and others, for future monitoring to safeguard both ecological and human health.

Over the last two decades, proliferations of benthic cyanobacteria producing derivatives of anatoxin-a have been reported in rivers worldwide. Here, we follow up on such a toxigenic event happening in the Areuse river in Switzerland and investigate the diversity and genomics of major bloom-forming riverine benthic cyanobacteria. We show, using 16S rRNA-based community profiling, that benthic communities are dominated by Oscillatoriales. We correlate the detection of one sequence variant matching the species with the presence of anatoxin-a derivatives and use long-read metagenomics to assemble complete circular genomes of the strain. The main dihydro-anatoxin-a-producing strain in the Areuse is distinct from strains isolated in New Zealand, the USA, and Canada, but forms a monophyletic strain cluster with them with average nucleotide identity values close to the species threshold. Compared to the rest of the genus, the toxin-producing strains encode a 15 % smaller genome, lacking genes for the synthesis of some essential vitamins. Toxigenic mats harbor a distinct microbiome dominated by proteobacteria and bacteroidetes, which may support cyanobacterial growth by providing them with essential nutrients. We recommend that strains closely related to be monitored internationally in order to help predict and mitigate similar cyanotoxic events.

This study explored the impact of varying nitrate to sulfide (N/S) ratios on nitrogen removal efficiency (NRE) in the sulfide-driven autotrophic denitrification and anammox (SDAD-anammox) system. Optimal nitrogen removal was observed at N/S ratios between 1.5 and 2.0. Isotope tracing results showed that the contribution of anammox to nitrogen removal was enhanced with increasing N/S ratios, reaching up to 37 % at the N/S ratio of 2.5. Additionally, complex nitrogen pathways were identified, including dissimilatory nitrate reduction to ammonium (DNRA). Furthermore, isotope tracing was innovatively applied to investigate NO emissions, demonstrating that higher N/S ratios significantly reduced NO emissions, with the lowest emissions at N/S ratio of 2.5. Gene expression analysis indicated that nitrogen and sulfide transformation genes decreased with increasing N/S ratios, while anammox-related genes first increased and then decreased, reflecting the system's microbial dynamics. These findings offer insights into nitrogen transformation pathways and NO production mechanisms in the SDAD-anammox process.