A series of cobalt porphyrins derived from hemin was prepared as cytochrome P450 models. Effects of substituents at the cobalt deuteroporphyrin-propionate side chains are investigated in oxidation of toluene with air to benzaldehyde and benzyl alcohol without the use of solvent and sacrificial co-reductant. The catalytic activity of cobalt porphyrins depends on the type of substituents. When the electron-withdrawing groups like -Cl, -Br, were introduced into the double propionate side chains, they can increase the catalyst stability and selectivity to benzaldehyde. In comparison with these electron-withdrawing groups, the electron-donor groups, such as -CH, -S-S- and -NH groups, can improve their catalytic activities. Moreover, the electron-donor group containing an unpaired electron (such as -S-S-, -NH) is benefit for improving its catalytic efficiency and promoting the electron delivery. It can be concluded that the double propionate side chains in the deuteroporphyrin complex may participate in oxidation process and effect electron transfer from the high-valent metalloporphyrin species to the substrate.

N-Alkyltheobromine (1-9) derivatives were obtained by reacting theobromine with appropriate alkyl halide under microwave irradiation at 100-150 W and by conventional synthesis. Formation of by-products of oxygen atom alkylation and 1-N-alkyltheobromine ring opening were considered. The presented compounds 1-5 have been studied as ion carriers in ion-selective membrane electrodes. Selectivity of these membranes was studied towards various anions in addition to transition and heavy metal cations. GRAPHICAL ABSTRACT: Alkylations of theobromine under microwave irradiation at 100-150 W and by conventional synthesis were performed. Formation of by-products of oxygen atom alkylation and 1-N-alkyltheobromine ring opening were observed. The achieved compounds have been studied as ion carriers in ion-selective membrane electrodes.

UC781, a very potent HIV-1 non-nucleoside reverse transcriptase inhibitor with extreme hydrophobicity and poor water solubility, is under development as a topical vaginal microbicide product to prevent HIV transmission. In this study, the thermodynamic behavior of the interaction between UC781 with three cyclodextrins (CDs): β-cyclodextrin (βCD), hydroxypropyl-β-cyclodextrin (HPβCD) and methyl-β-cyclodextrin (MβCD), was investigated using a reversed-phase HPLC method. A mobile phase consisting of acetonitrile: HO (30:70) solution containing various CD concentrations was used. The retention time at different temperatures was determined to evaluate the inclusion process. The influence of βCDs on the solubility and hydrophobicity of UC781 was characterized by retention time values. The results showed that the inclusion capacity of cyclodextrins follows the order MβCD > βCD > HPβCD. An enthalpy-entropy compensation effect was also observed. In addition, the results revealed that the change of ΔH is greater than that of ΔS. These results suggested that the complexation of UC781 with βCDs is an enthalpy driven process. The modification on β-cyclodextrin will influence the inclusion process.

The article presents the synthesis of novel 13- and 16-membered azobenzocrown derivatives with peripheral thiol moieties and preliminary studies assessing their possible application in plasmonic sensors based on gold nanoparticles. The effect of the length of the chain connecting the macrocycle with the thiol group and the effect of the presence of the additional functional compound, i.e. lipoic acid, on the sensor response was analyzed. Colloidal gold nanoparticles modified with a 16-membered crown with a thiol group on oxyethylene (compound ) or oxybutylene (compound ) linker was found to have good properties, allowing for detection of potassium ions in aqueous solutions at concentrations 8-20 mM for bifunctionalized nanogold and 4-26 mM for less stable, colloidal gold modified only with thiol derivatives of azobenzocrowns. The response towards potassium cations of bifunctionalized nanogold modified with compound was more stable in time than for the system incorporating compound . Compound obtained with the highest yield among all presented thiol derivatives of azobenzocrowns, was selected for further, more detailed, studies.

Spin-lattice relaxation times, s, for C nuclei in two cations H ( = 1, 5) of -(2-aminoethyl)-cyclam (, ) were determined by means of C{H} NMR experiments in aqueous solution at pH 11.5 and 0.2. The theoretical study [modeling with OPLS-AA, B3LYP/6-31G() geometry optimizations, dispersion-corrected energies (DFT-D3), and DFT-GIAO predictions of the NMR chemical shifts (including an IEF-PCM simulation of hydration)] was also done for several conformers of the tautomer -H not investigated before. The binding directions in protonated polyamino receptors necessary for efficient complexation of the nitrate anion(s) were briefly outlined, as well. All these results were discussed in terms of 'abnormal' C chemical shift changes found previously for the side-chain carbons of amine in strongly acidic solution (HNO). In conclusion, an earlier proposal of its association with NO at pH <1 was rejected. Instead, the participation of small amounts of a micro-species -H under such conditions can be proposed.

Syntheses of '-phenyltetrazole podands link with aliphatic chains containing oxygen, nitrogen and sulphur atoms, are described. The complexing properties of these compounds towards metal cations (Fe, Cu, Zn, Co, Ni) were investigated by absorption and infrared spectroscopy. The UV-Vis titrations were performed to estimate the stability constant values of the respective complexes with Cu ion. Changes in UV-Vis absorption spectra and IR spectra of compound under various concentrations of Cu ion in methanol suggest formation of very unstable complex. The structure of ligand has been deduced by X-ray crystallography.

C NMR titration studies of inclusion complexes of bicyclic terpenoid, fenchone enantiomers with α-cyclodextrin revealed their 1:2 guest-host stoichiometry. Sequential binding constants were determined indicating a strong binding cooperativity of two α-cyclodextrin to fenchone. The overall association constants were used to calculate the Gibbs free energies of diastereomeric complex formation, which might be used as a measure of chiral recognition of fenchone by α-cyclodextrin. These results were compared with corresponding data derived for camphor, which is an isomeric bicyclic terpenoid.

Complexation of alendronate sodium (AlnNa) with β-cyclodextrin (β-CD) was studied by means of ESI-mass spectrometry. The experimental results show that stable 1:1 inclusion complexes between selected bisphosphonates and β-CD were formed. In addition, complexes with different stoichiometry were observed. DFT/B3LYP calculations were performed to elucidate the different inclusion behavior between alendronate and β-CD. Molecular modeling showed that the inclusion complex of Aln-β-CD where the two phosphonate groups bound to the central carbon atom of bisphosphonate were inserted into the cavity of β-CD from its "top" side was thermodynamically more favorable than when they were inserted from its "bottom" side; the complexation energy was -74.05 versus -60.85 kcal/mol. The calculations indicated that the formation of conventional hydrogen bonds was the main factor for non-covalent β-CD:Aln complex formation and stabilization in the gas phase.

Complexation characteristics of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6, 18C6) with Li and K in a hydrophobic ionic liquid of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide under dry and humid conditions at 298.2 K were studied by H and C NMR chemical shifts. The comparison of the H and C chemical shifts of 18C6 molecule between the dry and humid IL solutions without the alkali metal ions showed that uncomplexed 18C6 molecules are solvated by water molecules in the humid ionic liquid solution. The changes in the H and C chemical shifts of 18C6 ligand molecule with the increases in the Li and K concentrations revealed that in both dry and humid ionic liquid solutions 18C6 molecule forms 1:1 complexes with Li and K. The H NMR data of water molecules in the humid ionic liquid solutions demonstrated that water molecules interact with Li-18C6 complexes and free Li, but do not with K-18C6 complexes and free K. The mechanisms of the formation of the Li and K complexes in the humid ionic liquid solution are different from each other due to the differences in the complex-water interactions.

A sensing materiel based on calix[4]arene molecules is electrochemically deposited on ITO electrode coated. A brown film was electrodeposited at a potential E = -1.00 V versus SCE in acetonitrile solvent, however in dichloromethane solvent, a bluish film auto-assembled on the ITO electrode coated at a potential E = -0.65 V versus SCE. Both films are subsequently analyzed by cyclic voltammetry and UV-Vis spectroscopy. This investigation shows that in acetonitrile solvent, the charge-transfer complex, calix[4]arenequinhydrone was formed in electrolytic solution and it was not self-assembled on the ITO electrode. The related UV-Vis spectrum shows a single absorption band towards a wavelength about 350 nm. The optical behaviour of the blue film shows two absorption bands: the first one appears on the first absorption band of the acceptor at 305 nm and the second one in the visible range at 502 nm. The band situated in the visible range correspond to a well-defined charge-transfer band indicating the presence of the charge-transfer complex, the calix[4]arenequinhydrone.

Cyclodextrins (CDs) are biocompatible, cyclic oligosaccharides that are widely used in various industrial applications and have intriguing interfacial science properties. While CD molecules typically have low surface activity, they are capable of stabilizing emulsions by inclusion complexation of oil-phase components at the oil/water interface, which results in Pickering emulsion formation. Such surfactant-free formulations have gained considerable attention in recent years, owing to their enhanced physical stability, improved tolerability, and superior environmental compatibility compared to conventional, surfactant-based emulsions. In this review, we critically describe the latest insights into the molecular mechanisms involved in CD stabilization of Pickering emulsions, including covering practical aspects such as methods to prepare CD-based Pickering emulsions, lipid encapsulation, and relevant stability issues. In addition, the rheological and textural features of CD-based Pickering emulsions are discussed and particular attention is focused on promising examples for drug delivery, cosmetic, and nutraceutical applications. The functionality of currently developed CD-based Pickering emulsions is also summarised, including examples such as antifungal uses, and we close by discussing emerging possibilities to utilize the molecular encapsulation of CD-based emulsions for translational medicine applications in the antiviral and antibacterial spaces.

Synthesis of new podands from resorcinarene and diethylene glycols are reported. The binding properties of these podands with alkali metal cations was studied by means of ESI-MS. The experimental results for podands with long diethylene glycol arms show the stable inclusion complexes with one or two metal cations and high affinity for sodium and potassium ions. This podands under appropriate conditions can thus form a sufficiently long cavity to accommodate more than one metal ion inside without disturbance of the axial symmetry like an ion channel. Podand with shorter arms, obtained from ethylene glycol form complexes with 1:1 stoichiometry and also readily dimers or trimers. In the presence of alkali metal cations this podand selectively binds cesium ions. The significant affinity of synthesized podands for the biologically important alkali metal ions may affect living organisms. Antibacterial activities were tested with series of Gram-positive and Gram-negative bacteria.

Novel biscrowns and were synthesized from 13-membered azobenzocrown ethers containing bromoalkylenoxy chains in position relative to the azo group. The synthesized diester molecules are dodecylmethylmalonic acid derivatives differing by the linker length. The synthesized compounds have the potential of being used as sodium ionophores in ion-selective electrodes. They were characterized and used as ionophores in classic and miniature, (screen-printed and glassy carbon) membrane ion-selective electrodes. Compound , a similar monoester derivative of 13-membered azobenzocrown, was synthesized and used in membrane electrodes for comparison. Lipophilicity of new ionophores was determined by TLC. Lipophilicity of bis(azobenzocrown)s was found to be within the range of logP = 12-13. It was observed that the particularly important selectivity coefficients log determined for new electrodes, being log = -2.5 and -2.6 (SSM, 0.1 M), are better than those of the electrodes featuring seven out of the nine commercially available sodium ionophores. It was concluded that the ionophore creates, in acetone, with sodium iodide, complex of 1:1 stoichiometry (sandwich complex) with stability constant (log) ca. 3.0.

While the world is in search of a vaccine that can cure COVID-19 disease, favipiravir is the most commonly used antiviral drug in the treatment of patients during the pandemic process. In this study, we investigated the host-guest interaction between the popular supramolecule calix[4]arene derivatives and the favipiravir drug by using the DFT (Density Functional Theory) method. The B3LYP hybrid method and 6-31G (d,p) basis set were utilized to determine the optimized structures of the host and guest molecules and their complexes. The negative adsorption energy (∆E) and adsorption enthalpy (∆H) calculated for the complexes formed between calix[4]arene compounds and favipiravir drug molecule mentioned that adsorption of favipiravir molecule was an exothermic process on calix[4]arene structures. On the other hand, among the calixarene derivatives in the study, Gibbs free energy change (∆G) value for the adsorption was only negative on calix[4]arene4 molecule. The infrared spectroscopy (IR) calculations were performed by examining the C=O, O-H and NH vibrational frequencies to see the adsorption behavior in the favipiravir-calix[4]arene complex. After adsorption of the favipiravir molecule, HOMO-LUMO gap values decreased significantly for the structures and therefore electrical conductivity increased proportionally. In addition, sensor response factors, Fermi energy levels and workfunction changes of calix[4]arene derivatives were calculated and examined. Charge transfer between the four calix[4]arene compounds and the favipiravir molecule has occurred after adsorption. This attributes that calix[4]arene derivatives can be used as a well-suited favipiravir sensor (electronic and workfunction) and adsorbent at room temperature. Based on the calculations made to see the solvent effect on the adsorption of favipiravir it was determined that it did not affect the interaction between the drug molecule and the calix[4]arene compound too much and the adsorption energy turned into a slightly less negative value.

The synthesis of a novel supramolecular system comprising of branched polyethylenimine and cyclodextrin, is presented. The synthesis route is based on the self-assembly phenomena with the inclusion of solvent molecules. The systems are formed by a hydrogen-bonding network and host-guest type interactions between the building blocks. It was found that the native cyclodextrin and polyethylenimine are able to form stable systems when the reaction medium constitutes a polar solvent forming host-guest type complexes with cyclodextrin. A special consideration was paid on the detailed spectroscopic analyses of the obtained water-soluble constructs, including ROESY and diffusion-ordered (DOSY) NMR spectroscopy studies. The versatility and significance of DOSY technique for the analysis of the cyclodextrin complexes and its non-covalent systems with branched polymers, were presented. It was also found that the guest molecules that were incorporated in the complexes exhibited enhanced thermal stability. The morphological details in the solid state were obtained by scanning electron microscope.

Recently a great interest in the field of protein engineering and the design of innovative drug delivery systems employing specific ligands such as cyclodextrins is observed. The paper reports the solid state, thermal method for protein coupling with β-cyclodextrin and the physicochemical and biological properties of the obtained conjugates. The structure of the obtained conjugates was investigated via liquid chromatography-mass spectrometry, dynamic light scattering and circular dichroism analysis. The presented conjugates were biologically active and covalently bound β-cyclodextrin preserved the ability to form inclusion complexes with the model compound. This report demonstrates the great potential of cyclodextrin as a modifying unit that can be used to modulate the properties of therapeutic proteins, additionally giving such conjugates the possibility to transport many therapeutic substances in the form of inclusion complexes. In addition, the paper presents the potential of protein-cyclodextrin conjugates to construct innovative bioactive molecules for biological and medical applications.

[This corrects the article DOI: 10.1007/s10847-017-0779-4.].

Azobenzene derivatives due to their photo- and electroactive properties are an important group of compounds finding applications in diverse fields. Due to the possibility of controlling the isomerization, azo-bearing structures are ideal building blocks for development of e.g. nanomaterials, smart polymers, molecular containers, photoswitches, and sensors. Important role play also macrocyclic compounds well known for their interesting binding properties. In this article selected macrocyclic compounds bearing azo group(s) are comprehensively described. Here, the relationship between compounds' structure and their properties (as e.g. ability to guest complexation, supramolecular structure formation, switching and motion) is reviewed.

Following the preparation of inclusion complex of cetirizine (CTZ) and β-cyclodextrin (β-CD), the compound was investigated to assess the possibility of modifying the physicochemical properties (solubility, release, stability, permeability) of CTZ after complexation that are vital for subsequent formulation studies involving the said complex. Changes in FT-IR/Raman spectra, DSC thermograms and XRD diffractograms confirmed the formation of a CTZ-β-CD system. Hydrophilic interaction chromatography with a DAD detector was employed to determine alterations of the CTZ concentration during studies following complexation. An analysis of a phase-solubility diagram of c = c indicated a linear rise in the solubility of CTZ as the concentration of β-CD increased. The inclusion of CTZ in a system with β-CD significantly reduced the instability of CTZ in the presence of oxidizing factors. It was also found that regardless of the pH of the acceptor fluids used in the release studies an increase was observed in the concentration of CTZ in CD system compared to its free form. The ability to permeate artificial biological membranes manifested by CTZ after complexation was enhanced as well. In summary, CD has significant potential to mask the bitter taste of CTZ and to counter the instability induced by oxidizing factors.

In the review hybrids of cationic porphyrins ( porphyrins functionalized by quaternary pyridinium groups) with nanocarbons such as fullerenes, carbon nanotubes and graphene are described. Selected examples of these species are characterized in regard of their properties and possible applications.

The paramagnetic lanthanide complexes with polyaminopolycarboxylate (PAPC) ligands attract considerable attention from the standpoint of potential applications thereof as relaxation agents used in medical magnetic resonance imaging (MRI) and in luminescent materials, as well as owing to promising use thereof as paramagnetic labels for studying the properties of biopolymers since they exhibit thermodynamic stability, good solubility in aqueous media and moderate toxicity. For the last decades, the NMR methods have been used to determine the physical and chemical properties of paramagnetic Ln compounds. The studies concerning paramagnetic NMR lanthanide-induced shifts (LISs) in dissolved Ln complexes, as well as the analysis of band shape as a function of temperature make it possible to obtain valuable information on the structure, intra- and intermolecular dynamics and paramagnetic properties thereof. This review is devoted solely to the following features: firstly, the processes of intramolecular dynamics of lanthanide complexes with polyamino-polycarboxylate ligands such as DOTA, EDTA and DTPA and their derivatives studied by NMR; secondly, the LISs of lanthanide complexes with EDTA, DOTA, DTPA and some of their derivatives depending on temperature and pH. Moreover, in this review, for the first time, the dependence of the activation energy of molecular dynamics in complexes with polydentate ligands on the atomic number of the lanthanide cation is analyzed and a monotonic change in energy is detected, which is due to the effect of lanthanide contraction. It should be noted that this phenomenon is quite general and may also appear in the future in many other series of lanthanide complexes with both other multidentate ligands and with bidentate and monodentate ligands. In the future, it is possible to predict the dependence of the properties of certain lanthanide complexes on the ionic radius of the lanthanide cation based on the approaches presented in the review. In this review, we have also presented the dynamic NMR as the main research method widely used to analyze the processes of molecular dynamics, and the structural studies based on the NMR relaxation spectroscopy and LIS analysis.